Your Position: Home > Product > Pump > Self-suction pump

AUTOPS 126 Series self-suction pamp

Update: 2015/3/26 View:
  • Brand: mindong eleceric/网赌最佳平台 十大-网赌平台最好
  • Type: AUTOPS 126
  • Order Online
Introduction

AUTOPS 126 Series  self-suction pamp 

Applications and installation

The Automatic booster system consists of a water pump, an airtight pressure tank, and a pressure switch. The specially designed structure make it better appearance and performance. The pressure tank with a non-toxic rubber membrane, or called pressure vessel, has been pre-filled with air pressure of about 0.12 Mpa before leaving the factory. These systems give suitable mains water pressure as required by modern domestic appliances and industrial applications, and will ensure enough water to supply all user outlets.

Pumps should be installed in a covered area, protected against the weather.

 

Operating limitations

Liquid temperature up to 60

Ambient temperature up to 40

Total suction lift up to 9m

Continuous duty

 

Construction features

PUMP

Pump Body: Cast Iron / Cast Iron with brass insert

Impeller: Brass / Plastic with brass insert

Mechanical Seal: Carbon / Ceramic / Stainless Steel

 

MOTOR

Single Phase

Heavy Duty Continuous Work

Motor Housing: Steel-plate

Shaft: Carbon Steel / Stainless Steel

Insulation: Class B / Class F

Protection: IP44 / IP54

Cooling: External Ventilation


Technical parameters


More Products
XML 地图 | Sitemap 地图